Commande | Description |
| CBQ(8) | Class Based Queueing |
| DHCPXD(8) | Client pour le protocole DHCP défini dans les RFC2131 et RFC2132 |
| HTB(8) | Hierarchy Token Bucket |
| IMAPd(8) | Internet Message Access Protocol server |
| IPOPd(8) | Post Office Protocol server |
| Linux-PAM(8) | Module d'authentification pour Linux |
| PAM(8) | Pluggable Authentication Modules for Linux |
| PRIO(8) | Priority qdisc |
| PolicyKit(8) | Centralized policy management |
| ab(8) | Apache HTTP server benchmarking tool |
| accept/reject(8) | accept/reject jobs sent to a destination |
| accton(8) | Mise en route ou arrêt de la comptabilité sur les processus |
| acpi_listen(8) | ACPI event listener |
| acpid(8) | Advanced Configuration and Power Interface event daemon |
| addgnupghome(8) | Create .gnupg home directories |
| addgroup(8) | Ajouter un utilisateur ou un groupe au système |
| addpart(8) | simple wrapper around the add partition ioctl |
| adduser(8) | Ajouter un utilisateur ou un groupe au système |
| adjtimex(8) | display or set the kernel time variables |
| agetty(8) | alternative Linux getty |
| anacron(8) | démarre des commandes périodiquement |
| anvil(8) | Postfix session count and request rate control |
| apachectl(8) | Apache HTTP Server Control Interface |
| apcsmart(8) | Driver for American Power Conversion Smart Protocol UPS equipment |
| apmd(8) | démon de gestion d'énergie avancée (Advanced Power Management = APM) |
| applygnupgdefaults(8) | Run gpgconf --apply-defaults for all users |
| apxs(8) | APache eXtenSion tool |
| arp(8) | manipulate the system ARP cache |
| arpd(8) | userspace arp daemon |
| arping(8) | send ARP REQUEST to a neighbour host |
| ata_id(8) | udev callout to read product/serial number from ATA drives |
| atd(8) | run jobs queued for later execution |
| atrun(8) | run jobs queued for later execution |
| automount(8) | manage autofs mount points |
| avahi-autoipd(8) | IPv4LL network address configuration daemon |
| avahi-autoipd.action(8) | avahi-autoipd action script |
| avahi-daemon(8) | The Avahi mDNS/DNS-SD daemon |
| badblocks(8) | rechercher des blocs défectueux sur un périphérique |
| base-config(8) | Configuration du système de base Debian |
| bccmd(8) | Utility for the CSR BCCMD interface |
| bcmxcp(8) | Driver for UPS'es supporting the serial BCM/XCP protocol |
| belkin(8) | Driver for Belkin serial UPS equipment |
| belkinunv(8) | Driver for Belkin Universal UPS and compatible |
| bestfcom(8) | Driver for Best Power Fortress/Ferrups |
| bestuferrups(8) | Driver for Best Power Micro-Ferrups |
| bestups(8) | Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment |
| biosdecode(8) | BIOS information decoder |
| blazer_ser(8) | Driver for Megatec/Q1 protocol serial/USB based UPS equipment |
| blazer_usb(8) | Driver for Megatec/Q1 protocol serial/USB based UPS equipment |
| blkid(8) | command-line utility to locate/print block device attributes |
| blockdev(8) | call block device ioctls from the command line |
| bluetoothd(8) | Bluetooth daemon |
| bootlogd(8) | record boot messages |
| bounce(8) | Postfix delivery status reports |
| brctl(8) | ethernet bridge administration |
| cachemgr.cgi(8) | squid HTTP proxy manager interface |
| cardctl(8) | Utilitaire de contrôle des cartes PCMCIA |
| cardmgr(8) | gestionnaire de périphériques PCMCIA |
| cdrom_id(8) | udev callout to determine the capabilities of optical drives and media |
| cfdisk(8) | Curses based disk partition table manipulator for Linux |
| chat(8) | Automated conversational script with a modem |
| chkconfig(8) | gère les informations des niveaux d'exécution pour les services système |
| chpasswd(8) | met à jour le fichier de mots de passe par lot |
| cifs.upcall(8) | Userspace upcall helper for Common Internet File System (CIFS) |
| clamd(8) | an anti-virus daemon |
| cleanup(8) | canonicalize and enqueue Postfix message |
| cleanup-info(8) | clean up the mess that bogus install-info may have done |
| clockdiff(8) | measure clock difference between hosts |
| consolehelper(8) | A wrapper that helps console users run system programs |
| crda(8) | send to the kernel a wireless regulatory domain for a given ISO / IEC 3166 alpha2 |
| create_floppy_devices(8) | udev callout to create all possible floppy device based on the CMOS type |
| cron(8) | daemon to execute scheduled commands (cronie V1.2) |
| cron-apt(8) | Programme d'automatisation des mises à jour du système par apt-get |
| cryptsetup(8) | setup cryptographic volumes for dm-crypt (including LUKS extension) |
| ctrlaltdel(8) | set the function of the Ctrl-Alt-Del combination |
| cups-calibrate(8) | ESP CUPS Printer Calibration Tool |
| cups-deviced(8) | cups device daemon |
| cups-driverd(8) | cups driver daemon |
| cups-genppd(8) | generate Gutenprint PPD files for use with CUPS |
| cups-genppdupdate(8) | update CUPS+Gutenprint PPD files |
| cups-lpd(8) | receive print jobs and report printer status to lpd clients |
| cups-polld(8) | cups printer polling daemon |
| cupsaddsmb(8) | export printers to samba for windows clients |
| cupsctl(8) | configure cupsd.conf options |
| cupsd(8) | common unix printing system daemon |
| cupsdisable(8) | stop/start printers and classes |
| cupsenable(8) | stop/start printers and classes |
| cupsfilter(8) | convert a file to another format using cups filters |
| cvsbug(8) | send problem report (PR) about CVS to a central support site |
| cyberpower(8) | Serial Driver for most Cyber Power Systems UPS equipment |
| cytune(8) | Tune driver parameters for Cyclades-Z multiport serial card |
| db_auth.pl(8) | Database auth helper for Squid |
| debugfs(8) | ext2/ext3 file system debugger |
| delpart(8) | simple wrapper around the del partition ioctl |
| depmod(8) | program to generate modules.dep and map files |
| detectloader(8) | Detect what type of loader you have on your disk |
| dhclient(8) | client DHCP (Dynamic Host Configuration Protocol) |
| dhclient-script(8) | script de configuration réseau du client DHCP |
| dhcpcd(8) | démon client DHCP |
| dhcpd(8) | Dynamic Host Configuration Protocol Server |
| dhcrelay(8) | Agent relais DHCP |
| discard(8) | Postfix discard mail delivery agent |
| distcache(8) | Distributed session caching |
| dmidecode(8) | DMI table decoder |
| dmraid(8) | discover and activate software (ATA)RAID |
| dmsetup(8) | low level logical volume management |
| dnssec-dsfromkey(8) | DNSSEC DS RR generation tool |
| dnssec-keyfromlabel(8) | DNSSEC key generation tool |
| dnssec-keygen(8) | DNSSEC key generation tool |
| dnssec-makekeyset(8) | DNSSEC zone signing tool |
| dnssec-signkey(8) | DNSSEC key set signing tool |
| dnssec-signzone(8) | DNSSEC zone signing tool |
| domainname(8) | affiche ou définit le nom de domaine du système |
| dosfsck(8) | vérifie et répare des systèmes de fichiers MS-DOS |
| dpkg-divert(8) | override a package's version of a file |
| dpkg-statoverride(8) | override ownership and mode of files |
| dummy-ups(8) | Driver for multi purpose UPS emulation |
| dump(8) | ext2/3 filesystem backup |
| dumpe2fs(8) | Afficher des informations sur le système de fichiers |
| e2fsck(8) | check a Linux ext2/ext3 file system |
| e2image(8) | Save critical ext2/ext3 filesystem metadata to a file |
| e2label(8) | Change le nom d'un système de fichiers ext2 |
| e2undo(8) | Replay an undo log for an ext2/ext3/ext4 filesystem |
| edd_id(8) | udev callout to identify BIOS disk drives via EDD |
| error(8) | Postfix error/retry mail delivery agent |
| etapro(8) | Driver for ETA UPS equipment |
| ether-wake(8) | A tool to send a Wake-On-LAN Magic Packet |
| ethtool(8) | Display or change ethernet card settings |
| eventlogadm(8) | push records into the Samba event log store |
| everups(8) | Driver for Ever UPS models |
| exportfs(8) | gestion de la liste des systèmes de fichiers partagés par NFS |
| faillog(8) | display faillog records or set login failure limits |
| fancontrol(8) | automated software based fan speed regulation |
| faxconfig(8) | changer dynamiquement les paramètres de configuration de |
| faxgetty(8) | processus de porte d'entrée pour |
| faxrunqd(8) | démon pour envoyer les fax qui ont été créés avec faxspool(1) |
| fdformat(8) | Low-level formats a floppy disk |
| fdisk(8) | Partition table manipulator for Linux |
| filefrag(8) | report on file fragmentation |
| findfs(8) | Find a filesystem by label or UUID |
| flush(8) | Postfix fast flush server |
| foomatic-addpjloptions(8) | Format PJL option information the for foomatic database |
| foomatic-getpjloptions(8) | <put a short description here> |
| foomatic-kitload(8) | installs a data kit into the foomatic database |
| foomatic-preferred-driver(8) | <put a short description here> |
| fping(8) | send ICMP ECHO_REQUEST packets to network hosts |
| fsck(8) | check and repair a Linux file system |
| fsck.minix(8) | a file system consistency checker for Linux |
| fstab-decode(8) | run a command with fstab-encoded arguments |
| ftpdctl(8) | ProFTPD control program |
| ftpshut(8) | shut down all proftpd servers at a given time |
| gamatronic(8) | Driver for Gamatronic UPS equipment |
| genericups(8) | Driver for contact-closure UPS equipment |
| getkeycodes(8) | print kernel scancode-to-keycode mapping table |
| gpm(8) | a cut and paste utility and mouse server for virtual consoles |
| groupadd(8) | Create a new group |
| groupdel(8) | Delete a group |
| groupmod(8) | Modifier un groupe |
| grpck(8) | verify integrity of group files |
| grpconv(8) | convert to and from shadow passwords and groups |
| grpunconv(8) | convert to and from shadow passwords and groups |
| grub(8) | the grub shell |
| grub-install(8) | install GRUB on your drive |
| grub-md5-crypt(8) | Encrypt a password in MD5 format |
| grub-terminfo(8) | Generate a terminfo command from a terminfo name |
| grubby(8) | command line tool for configuring grub, lilo, and elilo |
| hald(8) | HAL daemon |
| halt(8) | Arrête le système |
| hciattach(8) | attach serial devices via UART HCI to BlueZ stack |
| hciconfig(8) | configure Bluetooth devices |
| hddtemp(8) | Utility to monitor hard drive temperature |
| hdparm(8) | get/set SATA/IDE device parameters |
| hid2hci(8) | Bluetooth HID to HCI mode switching utility |
| hping2(8) | send (almost) arbitrary TCP/IP packets to network hosts |
| htcacheclean(8) | Clean up the disk cache |
| htdigconfig(8) | script to create fuzzy databases for ht://Dig |
| httpd(8) | Apache Hypertext Transfer Protocol Server |
| hwclock(8) | query and set the hardware clock (RTC) |
| i2cdetect(8) | detect I2C chips |
| i2cdump(8) | examine I2C registers |
| i2cget(8) | read from I2C/SMBus chip registers |
| i2cset(8) | set I2C registers |
| idmap_ad(8) | Samba's idmap_ad Backend for Winbind |
| idmap_adex(8) | Samba's idmap_adex Backend for Winbind |
| idmap_hash(8) | Samba's idmap_hash Backend for Winbind |
| idmap_ldap(8) | Samba's idmap_ldap Backend for Winbind |
| idmap_nss(8) | Samba's idmap_nss Backend for Winbind |
| idmap_rid(8) | Samba's idmap_rid Backend for Winbind |
| idmap_tdb(8) | Samba's idmap_tdb Backend for Winbind |
| idmap_tdb2(8) | Samba's idmap_tdb2 Backend for Winbind |
| ifconfig(8) | configure a network interface |
| ifdown(8) | Stops a network interface |
| ifenslave(8) | Attach and detach slave network devices to a bonding device |
| ifmetric(8) | An IPv4 route metrics manipulation tool |
| ifplugd(8) | A link detection daemon for ethernet devices |
| ifplugstatus(8) | A link beat detection tool |
| ifrename(8) | rename network interfaces based on various static criteria |
| iftab(8) | informations statiques sur les interfaces réseau |
| ifup(8) | Starts a network interface |
| imon(8) | surveille l'activité ISDN (RNIS) |
| init(8) | process control initialization |
| insmod(8) | simple program to insert a module into the Linux Kernel |
| install-catalog(8) | Gère un catalogue centralisé SGML ou XML |
| install-info(8) | create or update entry in Info directory |
| intro(8) | Introduction aux commandes d'administration système |
| ip(8) | show / manipulate routing, devices, policy routing and tunnels |
| ip6tables(8) | IPv6 packet filter administration |
| ip6tables-restore(8) | Restore IPv6 Tables |
| ip6tables-save(8) | dump iptables rules to stdout |
| ipcs(8) | Fournit des informations sur l'utilisation des mécanismes IPC |
| ipg(8) | send stream of UDP packets |
| ipset(8) | administration tool for IP sets |
| iptables(8) | administration tool for IPv4 packet filtering and NAT |
| iptables-restore(8) | Restitue des tables de règles d'iptables |
| iptables-save(8) | Sauvegarde des tables de règles d'iptables |
| iptables-xml(8) | Convert iptables-save format to XML |
| ipx_cmd(8) | bridge between Novell's SCMD driver and local IPX network |
| ipx_configure(8) | query/configure IPX behavior |
| ipx_interface(8) | add, delete, or display an IPX interface |
| ipx_internal_net(8) | add or delete the IPX internal network |
| ipx_route(8) | add or delete IPX route |
| isadump(8) | examine ISA registers |
| isapnp(8) | Configure ISA Plug-and-Play devices |
| isaset(8) | set ISA registers |
| isbmex(8) | Driver for ISBMEX UPS equipment |
| isosize(8) | outputs the length of a iso9660 file system |
| iw(8) | show / manipulate wireless devices and their configuration |
| iwconfig(8) | configure a wireless network interface |
| iwevent(8) | Affiche les Événements Wireless (Wireless Events) générés par les pilotes et les changements de paramètres |
| iwgetid(8) | Rapporte le ESSID, NWID ou l'Adresse de l'AP/Cell (Point d'Accès/ Cellule) du réseau sans fil |
| iwlist(8) | Get more detailed wireless information from a wireless interface |
| iwpriv(8) | configure les paramètres optionnels (privés) d'une interface réseau sans fil |
| iwspy(8) | Get wireless statistics from specific nodes |
| kbd-compat(8) | Scripts de couches kbd-compatibility pour les outils console Linux |
| kbdrate(8) | Réinitialise la vitesse de répétition et le délai de frappe du clavier |
| kbuildsycoca4(8) | Rebuilds the system configuration cache |
| kcookiejar4(8) | KDE HTTP cookie daemon |
| kded4(8) | KDE daemon - triggers Sycoca database updates when needed |
| kdeinit4(8) | Start all other KDE programs and kdeinit loadable modules (KLMs) |
| klogd(8) | Kernel Log Daemon |
| lastlog(8) | examine lastlog file |
| ld(8) | linux.so* - Chargeur et éditeur de liens dynamique |
| ld.so(8) | linux.so* - Chargeur et éditeur de liens dynamique |
| ld.so/ld(8) | linux.so - dynamic linker/loader |
| ldattach(8) | attach a line discipline to a serial line |
| ldconfig(8) | determine run-time link bindings |
| liebert(8) | Driver for Liebert contact-closure UPS equipment |
| lnstat(8) | unified linux network statistics |
| loadunimap(8) | load the kernel unicode-to-font mapping table |
| local(8) | Postfix local mail delivery |
| logresolve(8) | Resolve IP-addresses to hostnames in Apache log files |
| logrotate(8) | permute, compresse, et envoie les journaux système |
| logsave(8) | save the output of a command in a logfile |
| losetup(8) | Activer et contrôler les périphériques 'loop' |
| lpadmin(8) | configure cups printers and classes |
| lpc(8) | line printer control program |
| lpinfo(8) | show available devices or drivers |
| lpmove(8) | move a job or all jobs to a new destination |
| lsdev(8) | Afficher des informations sur le matériel installé |
| lsmod(8) | program to show the status of modules in the Linux Kernel |
| lsof(8) | list open files |
| lspci(8) | list all PCI devices |
| lsusb(8) | list USB devices |
| lwresd(8) | lightweight resolver daemon |
| makedbm(8) | create or dump a ypserv database file |
| makedev(8) | create devices |
| makewhatis(8) | Create the whatis database |
| mapscrn(8) | load screen output mapping table |
| master(8) | Postfix master process |
| masterguard(8) | Driver for Masterguard UPS equipment |
| mcserv(8) | Midnight Commander file server |
| mdadm(8) | manage MD devices aka Linux Software RAID |
| mdassemble(8) | assemble MD devices aka Linux Software RAID |
| megatec(8) | Driver for Megatec protocol based UPS equipment |
| megatec_usb(8) | Driver for Megatec protocol based USB UPS equipment |
| meinproc4(8) | KDE translator for XML |
| metasys(8) | Driver for Meta System UPS equipment |
| mge-shut(8) | Driver for MGE UPS serial SHUT Protocol UPS equipment |
| mge-utalk(8) | Driver for MGE UPS SYSTEMS UTalk protocol hardware |
| mgetty(8) | Un getty modem intelligent |
| microdowell(8) | Driver for Microdowell Enterprise UPS series |
| mii-diag(8) | Network adapter control and monitoring |
| mii-tool(8) | Voir et manipuler l'état de l'unité « Media Independent Interface » |
| mingetty(8) | Getty minimal pour la console |
| mkbootdisk(8) | créer une disquette de démarrage autonome pour le système en place |
| mkdosfs(8) | crée un système de fichiers MS-DOS sous Linux |
| mke2fs(8) | create an ext2/ext3 filesystem |
| mkfs(8) | Créer un système de fichiers Linux |
| mkfs.minix(8) | Créer un système de fichiers Minix |
| mkinitrd(8) | creates initial ramdisk images for preloading modules |
| mklost+found(8) | Créer un répertoire lost+found sur une partion montée Linux de type étendue 2 |
| mknetid(8) | generate data for netid map |
| mkreiserfs(8) | crée un système de fichiers ReiserFS pour Linux |
| mkswap(8) | crée une zone d'échange (swap) linux |
| modconf(8) | un utilitaire de configuration de module |
| modem-modeswitch(8) | udev callout to switch mobile broadband devices to their intended modem mode |
| modinfo(8) | program to show information about a Linux Kernel module |
| modprobe(8) | program to add and remove modules from the Linux Kernel |
| mount(8) | mount a file system |
| mount.cifs(8) | mount using the Common Internet File System (CIFS) |
| mount.nfs(8) | mount a Network File System |
| mount.nfs4(8) | mount a Network File System |
| msec(8) | Mandriva Linux security tools |
| mysqld(8) | the MySQL server |
| mysqlmanager(8) | the MySQL Instance Manager |
| named(8) | Internet domain name server |
| named-checkconf(8) | named configuration file syntax checking tool |
| named-checkzone(8) | zone file validity checking or converting tool |
| named-compilezone(8) | zone file validity checking or converting tool |
| nameif(8) | Nommer les interfaces réseau à partir des adresses MAC |
| nash(8) | script interpretor to interpret linuxrc images |
| ncsa_auth(8) | NCSA httpd-style password file authentication helper for Squid |
| net(8) | Tool for administration of Samba and remote CIFS servers |
| netdiscover(8) | an active/passive arp reconnaissance tool |
| netstat(8) | Affiche les connexions réseau, les tables de routage, les statistiques des interfaces, les connexions masquées, les messages netlink, et les membres multicast |
| netxml-ups(8) | Driver for MGE Network Management Card / Proxy (XML/HTTP Protocol) equipment |
| newusers(8) | crée et met à jour de nouveaux utilisateurs par lot |
| nfsstat(8) | Afficher des statistiques NFS |
| nisdomainname(8) | affiche ou définit le nom de domaine NIS(YP) du système |
| nmbd(8) | NetBIOS name server to provide NetBIOS over IP naming services to clients |
| nologin(8) | politely refuse a login |
| nstat(8) | network statistics tools |
| ntfs-3g(8) | Third Generation Read/Write NTFS Driver |
| ntfs-3g.probe(8) | Probe an NTFS volume mountability |
| ntp-keygen(8) | generate public and private keys |
| ntpd(8) | Network Time Protocol (NTP) daemon |
| ntpdate(8) | set the date and time via NTP |
| ntpdc(8) | special NTP query program |
| ntpq(8) | standard NTP query program |
| ntptime(8) | read kernel time variables |
| ntptrace(8) | trace a chain of NTP servers back to the primary source |
| nutupsdrv(8) | generic manual for unified NUT drivers |
| oneac(8) | Driver for Oneac UPS equipment |
| optiups(8) | Driver for Opti-UPS (Viewsonic) UPS and Zinto D (ONLINE-USV) equipment |
| oqmgr(8) | old Postfix queue manager |
| ownership(8) | Compaq ownership tag retriever |
| pam(8) | Pluggable Authentication Modules for Linux |
| pam_access(8) | PAM module for logdaemon style login access control |
| pam_auth(8) | Squid PAM authentication helper |
| pam_ck_connector(8) | Register session with ConsoleKit |
| pam_console(8) | determine user owning the system console |
| pam_console_apply(8) | set or revoke permissions for users at the system console |
| pam_cracklib(8) | PAM module to check the password against dictionary words |
| pam_debug(8) | PAM module to debug the PAM stack |
| pam_deny(8) | The locking-out PAM module |
| pam_echo(8) | PAM module for printing text messages |
| pam_env(8) | PAM module to set/unset environment variables |
| pam_exec(8) | PAM module which calls an external command |
| pam_faildelay(8) | Change the delay on failure per-application |
| pam_filter(8) | PAM filter module |
| pam_ftp(8) | PAM module for anonymous access module |
| pam_group(8) | PAM module for group access |
| pam_issue(8) | PAM module to add issue file to user prompt |
| pam_keyinit(8) | Kernel session keyring initialiser module |
| pam_lastlog(8) | PAM module to display date of last login |
| pam_limits(8) | PAM module to limit resources |
| pam_listfile(8) | deny or allow services based on an arbitrary file |
| pam_localuser(8) | require users to be listed in /etc/passwd |
| pam_loginuid(8) | Record user's login uid to the process attribute |
| pam_mail(8) | Inform about available mail |
| pam_mkhomedir(8) | PAM module to create users home directory |
| pam_motd(8) | Display the motd file |
| pam_namespace(8) | PAM module for configuring namespace for a session |
| pam_nologin(8) | Prevent non-root users from login |
| pam_permit(8) | The promiscuous module |
| pam_postgresok(8) | simple check of real UID and corresponding account name |
| pam_rhosts(8) | The rhosts PAM module |
| pam_rootok(8) | Gain only root access |
| pam_rps(8) | challenge-response authentication |
| pam_securetty(8) | Limit root login to special devices |
| pam_shells(8) | PAM module to check for valid login shell |
| pam_succeed_if(8) | test account characteristics |
| pam_tally(8) | The login counter (tallying) module |
| pam_tcb(8) | authentication, account, session, and password management PAM module for Unix with support for the tcb password shadowing scheme |
| pam_time(8) | PAM module for time control access |
| pam_timestamp(8) | authenticate using cached successful authentication attempts |
| pam_timestamp_check(8) | check or clear authentication timestamps |
| pam_tty_audit(8) | Enable or disable TTY auditing for specified users |
| pam_umask(8) | PAM module to set the file mode creation mask |
| pam_unix(8) | Module for traditional password authentication |
| pam_userdb(8) | PAM module to authenticate against a db database |
| pam_warn(8) | PAM module which logs all PAM items if called |
| pam_wheel(8) | Only permit root access to members of group wheel |
| pam_xauth(8) | PAM module to forward xauth keys between users |
| paperconfig(8) | configure the system default paper size |
| partimaged(8) | backups/restores partitions server |
| partx(8) | telling the kernel about presence and numbering of on-disk partitions |
| path_id(8) | udev callout to create a device path based unique name for a device to implement the Linux Persistent Device Naming scheme |
| pcimodules(8) | List kernel driver modules available for all currently plugged in PCI devices |
| pcscd(8) | PC/SC Smart Card Daemon |
| pdbedit(8) | manage the SAM database (Database of Samba Users) |
| pfifo(8) | Packet limited First In, First Out queue .P bfifo - Byte limited First In, First Out queue |
| pfifo_fast(8) | three-band first in, first out queue |
| pg3(8) | send stream of UDP packets |
| pgset(8) | send stream of UDP packets |
| pickup(8) | Postfix local mail pickup |
| ping(8) | envoyer des datagrammes ICMP ECHO_REQUEST à des hôtes sur un réseau |
| ping6(8) | envoyer des datagrammes ICMP ECHO_REQUEST à des hôtes sur un réseau |
| pipe(8) | Postfix delivery to external command |
| pivot_root(8) | change the root file system |
| plipconfig(8) | fine tune PLIP device parameters |
| pm-action(8) | Suspend or Hibernate your computer |
| pm-pmu(8) | suspend the computer on machines using a Macintosh-style PMU |
| pm-powersave(8) | Put your computer into low power mode |
| pmap_dump(8) | print a list of all registered RPC programs |
| pmap_set(8) | set the list of registered RPC programs |
| pnpdump(8) | Dump ISA Plug-And-Play devices resource information |
| portmap(8) | DARPA port to RPC program number mapper |
| powercom(8) | UPS driver for Powercom/Trust/Advice UPS equipment |
| powerman-pdu(8) | Driver for Powerman PDU |
| poweroff(8) | Arrête le système |
| powerpanel(8) | Driver for PowerPanel Plus compatible UPS equipment |
| ppp-watch(8) | daemon to make PPP interfaces act more like other interfaces |
| pppconfig(8) | configurateur de pppd |
| pppd(8) | Point-to-Point Protocol Daemon |
| pppdump(8) | convert PPP record file to readable format |
| pppoe(8) | Client PPPoE espace utilisateur |
| pppoe-connect(8) | Script shell pour gérer un lien PPPoE |
| pppoe-relay(8) | agent de relais PPPoE espace utilisateur |
| pppoe-server(8) | serveur PPPoE espace utilisateur |
| pppoe-setup(8) | Script shell pour configurer le client PPPoE de Roaring Penguin |
| pppoe-sniff(8) | examine le réseau pour des trames PPPoE non normalisées |
| pppoe-start(8) | Script shell pour établir un lien PPPoE |
| pppoe-status(8) | Script shell pour rapporter l'état d'un lien PPPoE |
| pppoe-stop(8) | Script shell pour fermer un lien PPPoE |
| pppstats(8) | affiche les statistiques PPP |
| preload(8) | Adaptive readahead daemon |
| proftpd(8) | Professional configurable, secure file transfer protocol server |
| proxymap(8) | Postfix lookup table proxy server |
| pwck(8) | verify integrity of password files |
| pwconv(8) | convert to and from shadow passwords and groups |
| pwmconfig(8) | tests the PWM outputs of sensors and configures fancontrol |
| pwunconv(8) | convert to and from shadow passwords and groups |
| pwupdate(8) | updates passwd and shadow NIS map |
| qmgr(8) | Postfix queue manager |
| qmqpd(8) | Postfix QMQP server |
| raw(8) | bind a Linux raw character device |
| rdev(8) | interroge/configure l'image du périphérique racine, la taille du disque mémoire ou le mode vidéo |
| rdisc(8) | network router discovery daemon |
| rdistd(8) | remote file distribution server program |
| reboot(8) | Arrête le système |
| rebootin(8) | Reboots the machine using a particular Boot Loader entry |
| red(8) | Random Early Detection |
| regdbdump(8) | parse and print out regulatory rules file |
| renice(8) | modifie la priorité des processus en cours d'exécution |
| request-key(8) | Handle key instantiation callback requests from the kernel |
| resize2fs(8) | ext2/ext3 file system resizer |
| resizecons(8) | change kernel idea of the console size |
| resolvconf(8) | manage nameserver information |
| restore(8) | restore files or file systems from backups made with dump |
| revnetgroup(8) | generate reverse netgroup data |
| rhino(8) | Driver for Brazilian Microsol RHINO UPS equipment |
| richcomm_usb(8) | Driver UPS equipment using Richcomm dry-contact to USB solution |
| ripquery(8) | send a RIP request to a remote host |
| rmmod(8) | simple program to remove a module from the Linux Kernel |
| rmt(8) | remote magtape protocol module |
| rndc(8) | name server control utility |
| rndc-confgen(8) | rndc key generation tool |
| rotatelogs(8) | Piped logging program to rotate Apache logs |
| route(8) | affiche / manipule la table de routage IP |
| routed(8) | network routing daemon |
| routef(8) | flush routes |
| routel(8) | list routes with pretty output format |
| rpc.gssd(8) | rpcsec_gss daemon |
| rpc.idmapd(8) | NFSv4 ID <-> Name Mapper |
| rpc.mountd(8) | NFS mount daemon |
| rpc.nfsd(8) | NFS server process |
| rpc.rquotad(8) | serveur de quotas distants |
| rpc.rstatd(8) | serveur de statistiques noyau |
| rpc.rusersd(8) | logged in users server |
| rpc.rwalld(8) | écrit des messages aux utilisateurs connectés au système |
| rpc.statd(8) | NSM status monitor |
| rpc.svcgssd(8) | server-side rpcsec_gss daemon |
| rpc.yppasswdd(8) | NIS password update daemon |
| rpc.ypxfrd(8) | NIS map transfer server |
| rpcbind(8) | universal addresses to RPC program number mapper |
| rpcdebug(8) | set and clear NFS and RPC kernel debug flags |
| rpcinfo(8) | report RPC information |
| rpm(8) | Gestionnaire de Paquetages Red Hat |
| rpm2cpio(8) | Extract cpio archive from RPM Package Manager (RPM) package |
| rpmbuild(8) | Build RPM Package(s) |
| rpmdeps(8) | Generate RPM Package Dependencies |
| rpmgraph(8) | Display RPM Package Dependency Graph |
| rquotad(8) | serveur de quotas distants |
| rstatd(8) | serveur de statistiques noyau |
| rtacct(8) | network statistics tools |
| rtcwake(8) | enter a system sleep state until specified wakeup time |
| rtmon(8) | listens to and monitors RTnetlink |
| run-parts(8) | lance des scripts ou programmes dans un répertoire |
| rurpme(8) | restricted urpme |
| rurpmi(8) | restricted urpmi |
| safenet(8) | Driver for SafeNet compatible UPS equipment |
| sash(8) | stand-alone shell with built-in commands |
| savelog(8) | sauvegarde un fichier journal |
| scache(8) | Postfix shared connection cache server |
| scsi_id(8) | retrieve and generate a unique SCSI identifier |
| sdparm(8) | access SCSI modes pages |
| sendfax(8) | envoie un fichier de fax de groupe 3 (fichiers G3) avec un modem/fax de classe 2 |
| sensord(8) | Sensor information logging daemon |
| sensors-detect(8) | detect hardware monitoring chips |
| service(8) | run a System V init script |
| set_tcb(8) | Wrapper script to convert between shadow and tcb passwords |
| setarch(8) | change reported architecture in new program environment and set personality flags |
| setclock(8) | sets the hardware clock from the system clock |
| setfont(8) | load EGA/VGA console screen font |
| setkeycodes(8) | load kernel scancode-to-keycode mapping table entries |
| setpci(8) | configure PCI devices |
| sfdisk(8) | Partition table manipulator for Linux |
| sfq(8) | Stochastic Fairness Queueing |
| sftp-server(8) | SFTP server subsystem |
| showconsolefont(8) | Show the current EGA/VGA console screen font |
| showmount(8) | affiche des informations de montage sur un serveur NFS |
| showq(8) | list the Postfix mail queue |
| shutdown(8) | arrêter le système |
| slapacl(8) | Check access to a list of attributes |
| slapadd(8) | Add entries to a SLAPD database |
| slapauth(8) | Check a list of string-represented IDs for LDAP authc/authz |
| slapcat(8) | SLAPD database to LDIF utility |
| slapd(8) | Stand-alone LDAP Daemon |
| slapdn(8) | Check a list of string-represented LDAP DNs based on schema syntax |
| slapindex(8) | Reindex entries in a SLAPD database |
| slappasswd(8) | OpenLDAP password utility |
| slaptest(8) | Check the suitability of the OpenLDAP slapd.conf file |
| slattach(8) | attach a network interface to a serial line |
| sm-notify(8) | Send out NSM reboot notifications |
| smbd(8) | server to provide SMB/CIFS services to clients |
| smbmnt(8) | Utilitaire d'aide pour le montage des systèmes de fichiers SMB |
| smbmount(8) | monte un système de fichiers SMB |
| smbpasswd(8) | change a user's SMB password |
| smbspool(8) | send a print file to an SMB printer |
| smtp(8) | Postfix SMTP+LMTP client |
| smtpd(8) | Postfix SMTP server |
| sndconfig(8) | Configure les cartes son pour une utilisation avec des modules de Kernel Linux |
| snmp-ups(8) | Multi-MIB Driver for SNMP UPS equipment |
| snmpd(8) | daemon to respond to SNMP request packets |
| socklist(8) | Afficher la liste des sockets ouvertes |
| solis(8) | Driver for Brazilian Microsol SOLIS UPS equipment |
| spawn(8) | Postfix external command spawner |
| squid(8) | proxy caching server |
| squid_ldap_auth(8) | Squid LDAP authentication helper |
| squid_ldap_group(8) | Squid LDAP external acl group helper |
| squid_radius_auth(8) | Squid RADIUS authentication helper |
| squid_session(8) | Squid session tracking external acl group helper |
| squid_unix_group(8) | Squid UNIX Group external_acl helper |
| ss(8) | another utility to investigate sockets |
| ssh-keysign(8) | programme utilisé par ssh dans l'authentification par machine |
| sshd(8) | OpenSSH SSH daemon |
| start-stop-daemon(8) | lance ou arrête des démons système |
| sudo(8) | execute a command as another user |
| sudoedit(8) | execute a command as another user |
| suexec(8) | Switch user before executing external programs |
| supermount(8) | Active ou désactive la fonction supermount |
| swapoff(8) | active/désactive les périphériques et fichiers pour la pagination sur disque |
| swapon(8) | active/désactive les périphériques et fichiers pour la pagination sur disque |
| symlinks(8) | symbolic link maintenance utility |
| sync(8) | Synchroniser les données en mémoire et celles sur disque |
| sys-unconfig(8) | script pour reconfigurer le système au prochain démarrage |
| sysctl(8) | configure kernel parameters at runtime |
| sysklogd(8) | Linux system logging utilities |
| syslog-ng(8) | logs system messages |
| tbf(8) | Token Bucket Filter |
| tc(8) | show / manipulate traffic control settings |
| tcb_convert(8) | utilities to convert to and from the tcb password shadowing scheme |
| tcb_unconvert(8) | utilities to convert to and from the tcb password shadowing scheme |
| tcpd(8) | access control facility for internet services |
| tcpdchk(8) | tcp wrapper configuration checker |
| tcpdmatch(8) | tcp wrapper oracle |
| tdbbackup(8) | tool for backing up and for validating the integrity of samba .tdb files |
| tdbdump(8) | tool for printing the contents of a TDB file |
| tdbtool(8) | manipulate the contents TDB files |
| telinit(8) | process control initialization |
| tickadj(8) | set time-related kernel variables |
| timeconfig(8) | simple interface for configuring system time parameters |
| tlsmgr(8) | Postfix TLS session cache and PRNG manager |
| tmpwatch(8) | removes files which haven't been accessed for a period of time |
| tracepath(8) | traces path to a network host discovering MTU along this path |
| tracepath6(8) | traces path to a network host discovering MTU along this path |
| traceroute(8) | print the route packets trace to network host |
| traceroute6(8) | traces path to a network host |
| tripplite(8) | Driver for Tripp-Lite SmartPro UPS equipment |
| tripplite_usb(8) | Driver for older Tripp Lite USB UPSes (not PDC HID) |
| tripplitesu(8) | Driver for Tripp-Lite SmartOnline (SU) UPS equipment |
| trivial-rewrite(8) | Postfix address rewriting and resolving daemon |
| tune2fs(8) | adjust tunable filesystem parameters on ext2/ext3 filesystems |
| tunelp(8) | set various parameters for the lp device |
| tzselect(8) | Sélectionner un fuseau horaire |
| ucarp(8) | Automatic IP failover |
| udevadm(8) | udev management tool |
| udevd(8) | event managing daemon |
| umount(8) | unmount file systems |
| umount.cifs(8) | for normal, non-root users, to unmount their own Common Internet File System (CIFS) mounts |
| umount.nfs(8) | unmount a Network File System |
| umount.nfs4(8) | unmount a Network File System |
| unix_chkpwd(8) | helper binary that verifies the password of the current user |
| update-alternatives(8) | maintain symbolic links determining default commands |
| update-modules(8) | (re)fabrique /etc/modules.conf et /etc/chandev.conf |
| update-reader.conf(8) | (re)generate /etc/reader.conf |
| updatedb(8) | update a database for mlocate |
| upsc(8) | example lightweight UPS client |
| upscmd(8) | UPS administration program for instant commands |
| upscode2(8) | Driver for UPScode II compatible UPS equipment |
| upsd(8) | UPS information server |
| upsdrvctl(8) | UPS driver controller |
| upslog(8) | UPS status logger |
| upsmon(8) | UPS monitor and shutdown controller |
| upsrw(8) | UPS variable administration tool |
| upssched(8) | Timer helper for scheduling events from upsmon |
| upsset.cgi(8) | Web-based UPS administration program |
| urpme(8) | rpm deinstaller |
| urpmf(8) | Finds the packages matching some conditions |
| urpmi(8) | rpm downloader, installer and dependency solver |
| urpmi.addmedia(8) | adds a new rpm media to be used by urpmi |
| urpmi.removemedia(8) | remove a rpm media from the known media of urpmi |
| urpmi.update(8) | Updates package lists for specified media |
| urpmihowto(8) | urpmi Advanced How-To |
| urpmq(8) | urpmi database query tool |
| usbhid-ups(8) | Driver for USB/HID UPS equipment |
| usbmon(8) | monitor USB traffic |
| useradd(8) | Create a new user or update default new user information |
| userdel(8) | Delete a user account and related files |
| userhelper(8) | A helper interface to PAM |
| usermod(8) | Modify a user account |
| usernetctl(8) | allow a user to manipulate a network interface if permitted |
| uuidd(8) | UUID generation daemon |
| v4l-conf(8) | configure un pilote video4linux |
| verify(8) | Postfix address verification server |
| vfs_acl_tdb(8) | Save NTFS-ACLs in a tdb file |
| vfs_acl_xattr(8) | Save NTFS-ACLs in Extended Attributes (EAs) |
| vfs_audit(8) | record selected Samba VFS operations in the system log |
| vfs_cacheprime(8) | prime the kernel file data cache |
| vfs_cap(8) | CAP encode filenames |
| vfs_catia(8) | translate illegal characters in Catia filenames |
| vfs_commit(8) | flush dirty data at specified intervals |
| vfs_default_quota(8) | store default quota records for Windows clients |
| vfs_extd_audit(8) | record selected Samba VFS operations |
| vfs_fake_perms(8) | enable read only Roaming Profiles |
| vfs_fileid(8) | Generates file_id structs with unique device id values for cluster setups |
| vfs_full_audit(8) | record Samba VFS operations in the system log |
| vfs_gpfs(8) | gpfs specific samba extensions like acls and prealloc |
| vfs_netatalk(8) | hide .AppleDouble files from CIFS clients |
| vfs_notify_fam(8) | FAM support for file change notifications |
| vfs_prealloc(8) | preallocate matching files to a predetermined size |
| vfs_preopen(8) | Hide read latencies for applications reading numbered files |
| vfs_readahead(8) | pre-load the kernel buffer cache |
| vfs_readonly(8) | make a Samba share read only for a specified time period |
| vfs_recycle(8) | Samba VFS recycle bin |
| vfs_shadow_copy(8) | Make a Samba share read only for a specified time period |
| vfs_shadow_copy2(8) | Expose snapshots to Windows clients as shadow copies |
| vfs_smb_traffic_analyzer(8) | log Samba VFS read and write operations through a socket to a helper application |
| vfs_streams_depot(8) | EXPERIMENTAL module to store alternate data streams in a central directory |
| vfs_streams_xattr(8) | Store alternate data streams in posix xattrs |
| vfs_xattr_tdb(8) | Save Extended Attributes (EAs) in a tdb file |
| vgck(8) | vérifie une zone de descripteurs de groupes de volumes |
| victronups(8) | Driver for IMV/Victron UPS unit Match, Match Lite, NetUps |
| vigr(8) | edit the password, group, shadow-password, or shadow-group file |
| vipw(8) | edit the password, group, shadow-password, or shadow-group file |
| virtual(8) | Postfix virtual domain mail delivery agent |
| visudo(8) | edit the sudoers file |
| vmstat(8) | Afficher des statistiques sur la mémoire virtuelle |
| vol_id(8) | probe filesystem type and read label and uuid |
| vpddecode(8) | VPD structure decoder |
| winbindd(8) | Name Service Switch daemon for resolving names from NT servers |
| wireless(8) | Wireless Tools et Wireless Extensions |
| wlandetect(8) | execute commands based on WLAN environment |
| wpa_background(8) | Background information on Wi-Fi Protected Access and IEEE 802.11i |
| wpa_cli(8) | WPA command line client |
| wpa_gui(8) | WPA Graphical User Interface |
| wpa_passphrase(8) | Generate a WPA PSK from an ASCII passphrase for a SSID |
| wpa_priv(8) | wpa_supplicant privilege separation helper |
| wpa_supplicant(8) | Wi-Fi Protected Access client and IEEE 802.1X supplicant |
| xconv.pl(8) | inetd.conf to xinetd.conf converter |
| xinetd(8) | Le démon des services Internet |
| xinetd.log(8) | format des logs du service xinetd |
| ypbind(8) | NIS binding process |
| ypdomainname(8) | affiche ou définit le nom de domaine NIS(YP) du système |
| yphelper(8) | helper application for internal use |
| ypinit(8) | NIS database install and build program |
| yppoll(8) | return version and master server of a NIS map |
| yppush(8) | force propagation of changed NIS databases |
| ypserv(8) | NIS server |
| ypset(8) | bind ypbind to a particular NIS server |
| yptest(8) | test NIS configuration |
| ypxfr(8) | transfer NIS database from remote server to local host |
| zdump(8) | Affichage du fuseau horaire |
| zic(8) | Compilation des informations de fuseau horaire |
